Light / Color sensor Add a Color sensor to the front of your robot - it should be between half a cm to a cm above the surface. Look at these instructions for adding the light sensor to your robot. EV3 students : Go through this lesson carefully - Using the Color Sensor in Reflected Light Mode Spike students: Do the three parts of the assignment:
Complete the Light Sensor worksheet to be found in your Google Drive in 'shared with me'. Program your robot to move forward until it sees a black line, then stop. Save to your personal folder as stopyourname. Make sure it is annotated.
..
Program your robot to follow the black oval.
To turn it in:
|
|
